2012年2月16日星期四

How to DIY


YISENNI Wall Coating is a water-based products, and need 24-48 hours dry to prevent some of poor construction penetrate the stains outside wall (such as the Pan-base, crystalline salt, rust, etc.), the new wall must be fully dry.Unpainted wood or metal parts should be brushing white oil paint to seal.


DIY drawing construction.

1. We have two methods about DIY. One is drawing on the wall. Then construct as the drawing . the other one is construct according the mold. 

2. choose the DIY drawing. Separate the drawing in different color. One color , one construction. 


3. choose the materials according to your drawing. Construction according to the different color. Big area first then fill up the smaller color. You can use hands or plastic knife to fill up the smaller color, then make it smooth and deal with the particular and conner. 

4. Mold construction is similar with the drawing construction. Put the drawing mold on the wall. Drawing and separate the color area according to the mold separation . Methods of construction is same as the drawing .


 For more information about our products, please contact us:

SKYPE:yisenni.wallfinish@skype.com
TEL: 86+760-8633-5918
FAX: 86+760-8668-8089

View our website:
http://www.yisenni.com 

2012年2月8日星期三

2012年2月1日星期三

Welcome to join us--YISENNI wall coating


n
  Company profile
   Huanwei Decorative Materials Co.,Ltd established in 2008, which covers an area of 1,400 square meters, is a leading manufacturer and supplier of a new ECO wall decorative material called YISENNI Wall covering
 
 
n   Now company has more than two hundred employees, investigation dept  5 person,  sales dept more than 20 person, and customer service dept more than 10 persons,registered capital more than $1,500,000.00 and production capacity reach for 200tons per month. 
 
n   We are the only company in the China that have rights import and export in the dustry of wall covering.
n
n   Now we are developing the market of  all over the world.Welcome to you join us. 
             
                Company products
   
1- DIY product, quick and easy apply           2- Natural Material
                3- Seamless covering, flexible                      4- Hide uneven, faded walls
5- Ready to use, repairable, long lasting        6- Easy to Handle
          7- Antistatic, heat insulation, sound insulation     8- One step finishing
      9- Control moisture in the room                 10- Allow walls to breath
         11- No limits to gesign or creativity               12- Inflammable material
13- No costly tools needed for applying           14- No waste
15- Work break is Possible                      16- Odorless product
17- Cover small hole and crack                  18- Color fastness
                      19- Smooth rough surfaces                      20- Zero VOC's       
                       


Products construction
We should deal with the wall surface before construction. Make it smooth and dry. Cover the wall with anti-alkaline prima one or two times. After that , we can construction on the wall.

Put YISENNI wall coating into huge plastic container . add the clean water , mix it uniform.
And immerse it about 1-2 hours.

  After wall coating immerse, mix YISENNI coating again before construction . Keep it without agglomeration. 

3.Use the plastic batch cuter or hands put YISENNI wall coating materials on the wall. Then use the special roller make it uniform. During the construction, pay attention on direction and uniform. Control the thickness in 1-2mm

 4. Use plastic batch cutter deal with the edge of the Conner. Keep the wall coating smooth.

 24-48hours after construction. When the wall coating dry, then finish.
 
   Contact us
Atten : Summer Kuang
Tel:86-0760-86335918
Fax:86-0760-86688089
E-mail:sally@yisenni.com
MSN:yisenni-sally@hotmail.com
SKYPE:yisenni.wallfinish@skype.com
Web:http://www.yisenni.com
http://www.yisennidecor.com